Petter Type Air Cooled Diesel Engine
Home / Kissan Shakti Iron Works
-
Petter Type, High Speed, Fan Type Air-Cooled (FTA), Single Cylinder, Bearing / Bush Type Diesel Engines :- 6.5, 7.5, 8, 10, 12 & 14 HP
Sr. No. Diesel Engine Model No. Type & Mark Rated Output HP(KW) Rated Speed (RPM) No. of Cyl. Bore X Stroke (mm) Cubic Cap. (cc) Specific Fuel Consumption At Full Load (SFC) Weight G / kwh G / bhph Nett (kgs) Gross (kgs) 1 AKV-6 DI,CBW, AP, CIG, BGC,TRB / BB 6.5 (4.8) 1500 1 85X110 624 251 185 170 235 2 AKV-7 DI,CBW, AP, CIG, BGC,TRB / BB 7.5 (5.50) 1500 1 87.5X110 661 251 185 170 235 3 AKV-8 DI,CBW, AP, CIG, BGC,TRB / BB 8.0 (5.90) 1500 1 95X110 780 251 185 190 255 4 AKV-10 DI,CBW, AP, CIG, BGC,TRB / BB 10.0 (7.35) 1500 1 102x110 898 251 185 190 255 5 AKV-12 DI,CBW, AP, CIG, BGC,TRB / BB 12.0 (8.80) 1500 1 114.3X110 1128 251 185 210 280 6 AKV-14 DI,CBW, AP, CIG, BGC,TRB / BB 14.0 (10.3) 1500 1 114.3X116 1190 251 185 210 280
DI = Direct injection
TRB = taper Roller Bearing (No. 32211)
BB = Bush BearingAP = Aluminium Piston
CBW = Crankshaft Balance Weight
BGC = Big Gear Cover (Cast Iron)FTA = Fan Type Aircooled
CIG = Cast Iron Camshaft Gear & Idler Gear
* Bush Bearing Diesel Engines Are Also Available On Demand
*Engines are also available on 1800 RPM On Demand
Compression Ratio :- 16.5:1
Flywheel Weight (Each) :- 39 (_+ 1) Kgs. (87.5mm) & 52 (+_ 1) (95 mm & 102 mm)
Fuel Tank Capacity :- 10.5 Ltrs.
Recommended Fuel Oil :- Diesel As Per IS : 1460 (H.S.D.)
20 Feet Container Loadability :- 90 Pcs.
Recommended Lubricating Oil :- Temperature - Rangewise
Lubricating Oil Sump Capacity :- 3.5Ltrs. - Maximum (Minimum - 3 Ltrs. To Be Maintained)
Lubricating Oil Consumption :- 1% of Fuel Consumption (Maximum)
Atmospheric Temp - 5C to 10 C 10 C to 45 C Above 45 C Viscosity No. SAE 20 SAE 30 SAE 40
OL = Overall Length
CS = Crankshaft Dia.
CH = Centre HeightOB = Overall Breadth
FW = Flywheel Dia.
FB = Foundation BreadthOH = Overall Height
FL = Foundation Length
ES = Extension Shaft Dia.NOTE :- Foundation Bed Should Always Be Strong, Flat & Levelled
Applications:- Pumpsets, self priming pumpsets, gensets, multi-crop threshers, chaff cutters, maize & rice hullers, mini rice plants, sugarcane crushers, corn grinding mills, cement concrete mixers, construction hoist, mining, air-compressors, borewell air-pumps etc.
(As continuous improvements are contemplated the illustrations & descriptions are not binding)
Petter Type, High Speed, Blower Type Air-Cooled (BTA), Single Cylinder, Bearing / Bush Type Diesel Engines :- 6.5,7.5,8,10,12, & 14 HP
Sr. No. Diesel Engine Model No. Type & Mark Rated Output HP(KW) Rated Speed (RPM) No. of Cyl. Bore X Stroke (mm) Cubic Cap. (cc) Specific Fuel Consumption At Full Load (SFC) Weight G / kwh G / bhph Nett (kgs) Gross (kgs) 1 AKV-6B DI,CBW, AP, CIG, BGC,TRB / BB 6.5 (4.8) 1500 1 85X110 624 251 185 175 240 2 AKV-7B DI,CBW, AP, CIG, BGC,TRB / BB 7.5 (5.50) 1500 1 87.5X110 661 251 185 175 240 3 AKV-8B DI,CBW, AP, CIG, BGC,TRB / BB 8.0 (5.90) 1500 1 95X110 780 251 185 195 265 4 AKV-10B DI,CBW, AP, CIG, BGC,TRB / BB 10.0 (7.35) 1500 1 102x110 898 251 185 195 265 5 AKV-12B DI,CBW, AP, CIG, BGC,TRB / BB 12.0 (8.80) 1500 1 114.3X110 1128 251 185 210 280 6 AKV-14B DI,CBW, AP, CIG, BGC,TRB / BB 14.0 (10.3) 1500 1 114.3X116 1190 251 185 210 280
DI = Direct injection
TRB = taper Roller Bearing (No. 32211)
BB = Bush BearingAP = Aluminium Piston
CBW = Crankshaft Balance Weight
BGC = Big Gear Cover (Cast Iron)BTA = Blower Type Aircooled
CIG = Cast Iron Camshaft Gear & Idler Gear
* Bush Bearing Diesel Engines Are Also Available On Demand
*Engines are also available on 1800 RPM On Demand
Compression Ratio :- 16.5:1
Flywheel Weight (Each) :- 39 (_+ 1) Kgs. (87.5mm) & 52 (+_ 1) (95 mm & 102 mm)
Fuel Tank Capacity :- 10.5 Ltrs.
Recommended Fuel Oil :- Diesel As Per IS : 1460 (H.S.D.)
20 Feet Container Loadability :- 80 Pcs.
Recommended Lubricating Oil :- Temperature - Rangewise
Lubricating Oil Sump Capacity :- 3.5Ltrs. - Maximum (Minimum - 3 Ltrs. To Be Maintained)
Lubricating Oil Consumption :- 1% of Fuel Consumption (Maximum)
Atmospheric Temp - 5C to 10 C 10 C to 45 C Above 45 C Viscosity No. SAE 20 SAE 30 SAE 40
OL = Overall Length
CS = Crankshaft Dia.
CH = Centre HeightOB = Overall Breadth
FW = Flywheel Dia.
FB = Foundation BreadthOH = Overall Height
FL = Foundation Length
ES = Extension Shaft Dia.NOTE :- Foundation Bed Should Always Be Strong, Flat & Levelled
Applications:- (For or Models) Pumpsets, self priming pumpsets, mud pumpsets, gensets, multi-crop threshers, maize & rice hullers, rice plants, sugarcane crushers, corn grinding mills, cement concrete mixers, construction hoist, mining. air-compressors, borewell air-pumps, turbine pumps,chaff cutters. (For all models except 80 mm bore) oil expellers, pulverizers, corn grinding mills, coffee processing machines (plants), marble & granite cutting machines, saw mills, mechanical winch, tractor, marine, (For 95 & 102 mm bore models) cotton gining mills etc..
(As continuous improvements are contemplated the illustrations & descriptions are not binding)
Petter Type, High Speed, Fan Type Air-Cooled (FTA) Double Cylinder, Bearing / Bush Type Diesel Engines:- 8,10,12,16,20,21 & 28HP
Sr. No. Diesel Engine Model No. Type & Mark Rated Output HP(KW) Rated Speed (RPM) No. of Cyl. Bore X Stroke (mm) Cubic Cap. (cc) Specific Fuel Consumption At Full Load (SFC) Weight G / kwh G / bhph Nett (kgs) Gross (kgs) 1 2 AKV-8 DI, GOP, CBW, AP, CIG, BGC,TRB /BB 8 (5.90) 1500 2 80X110 553 251 185 270 365 2 2 AKV-10 DI, GOP, CBW, AP, CIG, BGC,TRB /BB 10 (7.35) 1500 2 85X110 624 251 185 270 365 3 2 AKV-12 DI, GOP, CBW, AP, CIG, BGC,TRB /BB 12 (8.80) 1500 2 87.5X110 661 251 185 270 365 4 2 AKV-16 DI, GOP, CBW, AP, CIG, BGC,TRB /BB 16 (11.8) 1500 2 95X110 780 251 185 275 370 5 2 AKV-20 DI, GOP, CBW, AP, CIG, BGC,TRB /BB 20 (14.7) 1500 2 102X110 898 251 185 290 385 6 2 AKV-24 DI, GOP, CBW, HFW, AP, CIG, BGC,TRB /BB 24 (17.7) 1500 2 114.3X110 1128 251 185 295 390 7 2 AKV-28 DI, GOP, CBW, HFW, AP, CIG, BGC,TRB /BB 28 (20.6) 1500 2 114.3X116 1190 251 185 295 390
DI = Direct injection
GOP = Gear Oil Pump
AP = Aluminium PistonFTA = Fan Type Aircooled
CBW = Crankshaft Balance Weight
BB = Bush BearingBGC = Big Gear Cover (Cast Iron)
CIG = Cast Iron Camshaft Gear & Idler Gear
* Bush Bearing Diesel Engines Are Also Available On Demand
*Engines are also available on 1800 RPM On Demand
Compression Ratio :- 16.5:1
Flywheel Weight :- 52 (+_ 1 Kgs.) Up to (87.5mm) For 95, 102 mm Bore 65 (+_ 1 Kgs.)
Fuel Tank Capacity :- 20 Ltrs.
Recommended Fuel Oil :- Diesel As Per IS : 1460 (H.S.D.)
20 Feet Container Loadability :- 40 Pcs.
Recommended Lubricating Oil :- Temperature - Rangewise
Lubricating Oil Consumption :- 1% of Fuel Consumption (Maximum)
Lubricating Oil Sump Capacity :- 7 Ltrs. - Maximum (Minimum - 6.5 Ltrs. To Be Maintained)
Atmospheric Temp - 5C to 10 C 10 C to 45 C Above 45 C Viscosity No. SAE 20 SAE 30 SAE 40
OL = Overall Length
CS = Crankshaft Dia.
CH = Centre HeightOB = Overall Breadth
FW = Flywheel Dia.
FB = Foundation BreadthOH = Overall Height
FL = Foundation Length
ES = Extension Shaft Dia.NOTE :- Foundation Bed Should Always Be Strong, Flat & Levelled
Applications:- Pumpsets, self priming pumpsets, mud pumpset, gensets, multi-crop threshers, chaff cutters, maize & rice hullers, mini rice plants, sugarcane crushers, corn grinding mills, cement concrete mixers, construction hoist, mining, air-compressors, borewell air-pumps etc...
(As continuous improvements are contemplated the illustrations & descriptions are not binding)
Petter Type, High Speed, Blower Type Air-Cooled (BTA) Double Cylinder, Bearing / Bush Type Diesel Engines:- 8,10,12,16,20,24, & 28HP
Sr. No. Diesel Engine Model No. Type & Mark Rated Output HP(KW) Rated Speed (RPM) No. of Cyl. Bore X Stroke (mm) Cubic Cap. (cc) Specific Fuel Consumption At Full Load (SFC) Weight G / kwh G / bhph Nett (kgs) Gross (kgs) 1 2 AKV-8B DI, GOP, CBW, AP, CIG, BGC,TRB /BB 8 (5.90) 1500 2 80X110 553 251 185 275 370 2 2 AKV-10B DI, GOP, CBW, AP, CIG, BGC,TRB /BB 10 (7.35) 1500 2 85X110 624 251 185 275 370 3 2 AKV-12B DI, GOP, CBW, AP, CIG, BGC,TRB /BB 12 (8.80) 1500 2 87.5X110 661 251 185 275 370 4 2 AKV-16B DI, GOP, CBW, AP, CIG, BGC,TRB /BB 16 (11.8) 1500 2 95X110 780 251 185 280 375 5 2 AKV-20B DI, GOP, CBW, AP, CIG, BGC,TRB /BB 20 (14.7) 1500 2 102X110 898 251 185 295 390 6 2 AKV-24B DI, GOP, CBW, HFW, AP, CIG, BGC,TRB /BB 24 (17.7) 1500 2 114.3X110 1128 251 185 300 390 7 2 AKV-28B DI, GOP, CBW, HFW, AP, CIG, BGC,TRB /BB 28 (20.6) 1500 2 114.3X116 1190 251 185 300 395
DI = Direct injection
GOP = Gear Oil Pump
AP = Aluminium Piston
BGC = Big Gear Cover (Cast Iron)TRB = Taper Roller Bearing (No. 32211)
CBW = Crankshaft Balance Weight
HFW = Heavy FlywheelBTA = Blower Type Aircooled
CIG = Cast Iron Camshaft Gear & Idler Gear
BB = Bush Bearing
* Bush Bearing Diesel Engines Are Also Available On Demand
*Engines are also available on 1800 RPM On Demand
Compression Ratio :- 16.5:1
Flywheel Weight :- 52 (+_ 1 Kgs.) Up to (87.5mm) For 95, 102 mm Bore 65 (+_ 1 Kgs.)
Fuel Tank Capacity :- 20 Ltrs.
Recommended Fuel Oil :- Diesel As Per IS : 1460 (H.S.D.)
20 Feet Container Loadability :- 40 Pcs.
Recommended Lubricating Oil :- Temperature - Rangewise
Lubricating Oil Consumption :- 1% of Fuel Consumption (Maximum)
Lubricating Oil Sump Capacity :- 7 Ltrs. - Maximum (Minimum - 6.5 Ltrs. To Be Maintained)
Atmospheric Temp - 5C to 10 C 10 C to 45 C Above 45 C Viscosity No. SAE 20 SAE 30 SAE 40
OL = Overall Length
CS = Crankshaft Dia.
CH = Centre HeightOB = Overall Breadth
FW = Flywheel Dia.
FB = Foundation BreadthOH = Overall Height
FL = Foundation Length
ES = Extension Shaft Dia.NOTE :- Foundation Bed Should Always Be Strong, Flat & Levelled
Applications:- (For all Models) Pumpsets, self priming pumpsets, mud pumpsets, gensets, multi-crop threshers, maize & rice hullers, rice plants, sugarcane crushers, corn grinding mills, cement concrete mixers, construction hoist, mining. air-compressors, borewell air-pumps, turbine pumps, chaff cutters. (For all models except 80 mm bore) oil expellers, pulverizers, corn grinding mills, coffee processing machines (plants), marble & granite cutting machines, saw mills, mechanical winch, tractor, marine, (For 95 & 102 mm bore models) cotton gining mills etc..
(As continuous improvements are contemplated the illustrations & descriptions are not binding)
Petter Type, High Speed Diesel Engines
Bearing / Bush Type Diesel Engines With Triangular Flange & Long Extension Shaft Arrangement (Flywheel Side):- 4 To 24 HP
Petter Type, High Speed Diesel Engines
Diesel Engines
All purpose agricultural & construction equipment diesel engine.
C.I. Construction robust engine.
simple design, & easy in operation.
Extensive parts are interchangeable within the engine family.
Continuous operation up to rated r.p.m.
Fuel economic due to its low r.p.m
Water cool, Vertical, Double cylinder, Four stroke Diesel engine.
Turbulence-chamber combustion ( pre – combustion )
Liner of chrome plated for better life.
Crankshaft running on taper roller bearing.
Low noise due to its lower r.p.m.
Splash lubrication
Piston of Aluminium Material
Pumping Set.
Thresher.
Rice Mill.
Turbine Pump.
Sugarcane Crusher.
Oil Expeller.
Stone crusher.
Concrete mixture.
Conveyor belt drive
Air cleaner.
Exhaust silencer.
Diesel filter.
Fuel tank.
Starting handle.
Tool kit bag.
Instruction manual.